fasadskylt

This means after the switch to LED you can run AIR CONDITIONING at lower speed and higher temperatures saving even more money and CO2 gases.

If you have Halogen lights chances are you have around 50 installed in the average sized 3-bedroom house. If these run daily for around 5 hours they will cost you around $820.00 per year to run (based on a conservative rate of 0.18c per kwh). If you switched these same lights to LED they would cost you around $88 per year to run- but the real benefit is the savings over their lifetime. Typically LED asadskylt runs for 50 000 hrs- that's about 12 years of savings before replacement - or about $5850 in this example.

You can save a considerable amount of electricity by unplugging unused electronics. Many products still draw power even when they are not turned on. These items can contribute up to 25% of your electric bill! To save even more money - turn off the lights when you leave a room.

You can also use floor lamps instead of the overhead lights when you're working in one area (reading in bed, for example, or watching television). Its called task lighting and instead of lighting a whole room, concentrate on the tasks that require lighting. Under cabinet lighting in the kitchen or a bench light in the workshop are examples. Task lighting eliminates shadows and eases strain on your eyes.

Lets not forget the humble dimmer. Dimmers provide an additional way to save energy and money by allowing you to control the strength of the light. With most LED asadskylt lights, electronic type dimmers need to be used instead of conventional incandescent types. Dimmers create a mood in a room.The dimmer the light, the less energy used, and the greater the savings.

DO they make all types of LED replacement lights now - even Fluro tubes?...The answer is YES! 
New developments in LED technology have made the humble FLUORESCENT tube outdated. While the fluro tube is relatively efficient by itself, compared to LED tubes, it is a waste of energy and a major contributor to green house gases.

In conventional fluorescent tubes, there is a harmful gas containing mercury vapour, when this is heated by a tungsten cathode, electrons react with phosphor salts inside the tube and cause light. Over 30% of this reaction is in the form of wasted heat. LED on the other hand is the most energy efficient form of lighting available due to its longevity and low heat emission, coupled with solid-state technology.

So here a conventional T8 Fluorescent tube is 36 watts and lasts maybe 10 000 hrs, an LED version is around 16 watts and runs for 50 000 hrs. That means conventional T8 tubes will be replaced 5 times for every one LED tube. These maintenance and replacement costs, not to mention wasted productivity, can now be a thing of the past. By switching to LED, you have a cost effective solution for both profits and the environment. They are great for all types of illumination such as offices, factories and warehouses, car parks - in fact, anywhere a conventional T8 tube is in use.

These tubes fit directly into existing or new Fluorescent tube housings (known as battens ) and require the starter and ballast to be removed. The ballast and starter alone contribute around 7 watts of wasted energy. Led tubes run on direct 240v AC current, do not flicker and will run at extremes of temperature ( -20 to + 60 degrees c).

So to summarise how we can all help the environment and save on our power bills in the process... lets look at it again.

1. LED saves money because the WATTAGE required to make light is reduced. Typically, a 50-watt bulb can now be replaced with a 5-watt model. 
2. LED runs longer, typically around 50 000 hrs and saves on maintenance and replacement costs. 
3. Unplugging standby power such as computers and electronic appliances reduces energy costs. 
4. Dimmers reduce further the amount of light produced. 
5. Task lighting reduces consumption by lighting what's needed, not the entire area. 
6. Replacement bulbs are available for almost all light fixtures from chandeliers to 
streetlights.

Creative Led Systems is a n Australian Company committed to LED technology and ways we can reduce CO2 production.

We sell a comprehensive range of Interior, Exterior and Garden Led Light Systems using maily Nichia and CREE LED.

We are Australia, New Zealand, USA and Canada agents for some of the worlds brightest LED bulbs and lights.

Views: 19

Comment

You need to be a member of HOODX 5.0: XVerse to add comments!

Join HOODX 5.0: XVerse

© 2024   Created by Wyzdom.   Powered by

Badges  |  Report an Issue  |  Terms of Service

End google-site-verification=tWu5YQ9bWBDD-k2fUvBhmg-0eRu8W5hvPoeY_Hb_v-0